Hi friends in the previous post we have discussed types of tool die operations. This post is about types of dies used in the manufacturing industry for sheet metal components. In which the function of dies and differences between these dies are mentioned.
For example, the figure of bending tool is given. The tool will rest on the bed of tool. And ram part will press the sheet metal component to produce a bend.
Sheet Metal Stamping Dies
Stamping dies are used to produce the high volume production by stamping process. The die will have the ability to provide appropriate stamping force to perform the required operation. In the die there will be two parts, upper half and the lower half. These part can also be referred as male part and female part. Male or female parts can take either the upper position or the lower position.Construction of dies
In a tool, the punches of respective operations like blanking and punching is at the ram or at the bed of the plate. The ram will bolted with the bed of the machine.For example, the figure of bending tool is given. The tool will rest on the bed of tool. And ram part will press the sheet metal component to produce a bend.
![]() |
Bending press tool |
I have to admit this was one of the most useful read and experience to take a journey here on this cleanly white page. The types of dies in sheet metal die details you represented was indeed very knowledgeable and educative. Just a few minutes back I was on heatsign that works on metal stamping and also produce metal stamping machine. But entering in this site I got some new innovative information on stamping dies and also pleased to get though its type. Thanks for sharing surely.
ReplyDeleteEquipments like concrete mixers for mixing the cement and sand in rotating drums is also used by all construction engineers. bricklaying tools
ReplyDelete